ブログに戻る
ハウツーガイド 2026-11-20 KeepCup® | Reusable Cups, Bottles & Bowls — Made for ... 0 ビュー

Ace Cupのコルクスリーブの交換方法

Ace Cupのコルクスリーブの交換方法

KeepCup Ace Recycled Cork Glass Cupのコークスリーブを安全に取り外し、交換する方法と、寿命を延ばすためのお手入れのヒントをご紹介します。

Why You Might Need to Replace the Cork Sleeve

The cork band on your Ace Recycled Cork Glass Cup is designed for comfort and insulation, but daily use, spills, or wear can eventually make it look tired or feel loose. Replacing the sleeve can give your cup a fresh start without buying a whole new cup.

This guide covers how to safely remove the old cork band, what to consider for a replacement, and how to care for the new sleeve to make it last.

How to Remove the Old Cork Sleeve

The cork band is not permanently attached, so removal is straightforward. Follow these steps to avoid damaging the glass cup.

  1. 1. Wash and dry the cup: Clean the cup as usual to remove any residue. Dry the glass and cork thoroughly so the sleeve slides off more easily.
  2. 2. Gently roll the cork band downward: Starting at the top edge, use your fingers to roll the cork band toward the bottom of the cup. Cork is flexible but can tear if forced, so work slowly around the circumference.
  3. 3. Slide the band off the base: Once the band is near the bottom, it should slip off over the base of the cup. If it feels stuck, try rolling it a little more rather than pulling straight off.

What to Know About Replacement Sleeves

KeepCup does not currently sell separate cork sleeves for the Ace cup. If your sleeve is damaged, you may need to source a compatible cork band from a craft or cup-repair supplier, or consider a DIY wrap using cork sheet material.

The original sleeve is made from recycled cork, so any replacement should match the cup's diameter and height. Measure the inner circumference and height of your existing sleeve before ordering a replacement.

Original Cup Details for Reference

  • Ace Recycled Cork Glass Cup: The Ace Recycled Cork Glass Cup features a glass body and a recycled cork band that provides a comfortable, insulating grip. The cork band is designed to be removable for cleaning or replacement, but it is not a standard spare part. Knowing the original materials helps you choose a compatible replacement.
    Ace Recycled Cork Glass Cup
    Ace Recycled Cork Glass Cup

Caring for Your New Cork Sleeve

Once you have a replacement sleeve, keep it in good shape by following these care tips:

Hand wash the cork band with mild soap and water, then let it air dry completely before putting it back on the cup. Avoid soaking the cork or putting it in the dishwasher.

If the sleeve feels loose after installation, a small dab of food-safe silicone adhesive can help keep it in place. Check that the adhesive is safe for contact with drinking vessels.

関連記事

Customer Service
ホーム
商品
カート
マイページ